Description:
1.This is a half-bridge load sensor, widely in hopper scales, platform scales, platform balance, belt scales and other electronic weighing devices.
2.When the half-bridge is being stretched, it sends signal via the red signal wire.
3.You can use multiple load sensors simultaneously to increase the capacity range. Such as two sensors full-bridge measurements: 50kgx2=100kg; four sensor full-bridge measurements: 50kgx4=200kg Parallel use to add additional capacity.
4. Wires connected: white wires are connected in series, black wires are connected in series, and red wires for power supply and output.

Specification:
Product Name: Half-bridge Weigh Sensor
Rated Load: 50kg
Output impedance: 1000+/-5 Ohm
Input impedance: 1000+/-5 Ohm
Error: +/-0.2 F.S.
Sensitivity(mV/V): 1+/-0.15
Wire Length: 410mm
Nonlinear: 0.08% F.S
Hysteresis : 0.1% F.S
Repeatability: 0.05% F.S
Creep (5 minutes): 0.05% F.S
Maximum Operating Voltage: DC 8V
Insulation Resistance: 2000 M Ohm
Load Cell Size: 34 x 34 x 2.5mm (L*W*T)
Material: Aluminum alloy