8S BMS 24V 3.2V 25.6V 100A 200A Active Balance 5A Balancing Current for LiFePO4 Sodium-ion Battery Solar Energy Storage System
A 4S 12V 200A active balance BMS with up to 5A balancing current manages a 4-series 3.2V LiFePO4 battery pack (nominal 12.8V) while transferring charge between cells to keep voltages even.
It protects against overcharge, over-discharge, overcurrent, and short circuits while transferring charge from high-voltage cells to low-voltage cells.
Key Specifications & Sizing
- Battery Configuration: 4S LiFePO4 (3.2V nominal per cell; ~12.8V nominal pack; typical charge cut-off 14.2V–14.6V and discharge cut-off 10.0V–11.2V).
- Continuous Current (200A): Supports high-draw 12V loads or inverters (around 2,000W–2,400W depending on efficiency and voltage sag; check exact continuous vs. peak/instantaneous ratings on the specific board).
- Active Balancing (Up to 5A): Moves energy from higher-voltage cells to lower-voltage cells rather than burning off excess voltage as heat, which helps correct cell drift faster than low-current passive balancers.
- Smart & Protection Features: Look for overcharge, over-discharge, overcurrent, short-circuit, and temperature protection, plus Bluetooth or communication interfaces (UART/CAN/RS485) if you want app monitoring or parameter tuning.
Important Buying Checks
• Chemistry & S-Count Match: Confirm the unit is specifically calibrated for LiFePO4 (LFP) and strictly 4S.
• Port Type & Comms: Check whether you need common-port or separate-port wiring, plus Bluetooth, RS485, or CAN bus if connecting to a smart inverter or monitoring app.
• Wire Gauge & Lugs: Ensure B-/P-/C- terminals and leads match 100A or 200A continuous current without overheating.
Model Number : BMS 8s
- Current: 200A
- Overcharge protection voltage: 3.65V
- Overcharge release voltage: 3.55V
- Over-discharge protection voltage: 2.35V
- Over-discharge release voltage: 2.55V
- Active current balancing: MAX 5.5A

