JCD 80W 908U Electric Soldering Irons LCD Digital Soldering Iron Cautin Tools with Switch Ceramic Heater
 
Product Description
 
CLEAR LCD SCREEN DISPLAY: A high-definition LCD screen display, which indicates the temperature status more clearly. Two temperature units showed on screen, the degrees Celcius and degree Fahrenheit.
ADJUSTABLE TEMPERATURE:The temperature of this soldering iron can be adjusted from 180℃/356℉ to 480℃/896℉. As a result, it can regulate the temperature in a more accurate and effective way.
HEATING-UP FAST: With a high power of 80W, It can be heated up quickly and due to this fast heat-up ceramic core, it can be heated to the temperature that is already set within a short period of time
DURABLE IN USE: This type of soldering iron is made from some metal alloys, which is oxidation resisting and it won’t rust easily while immersing in water. so it can be used for a long-term period.
 
Features:
Voltage: AC220-240V 
Power: 80W 
Frequency: 50Hz
Temperature Range: 180~500℃
Temperature Stability: ±5℃ 
Heating Type: Wmore Ceramics Element 
Soldering Iron Tips: 900M-B1.2
Wire Length: 1.4m 
Soldering Iron Size: Approx.242*25*25mm
Soldering Iron Weight: Approx.96g
 
 
How to solder？
1. Determine the right temperature for your project. Which temperature to use depends on the materials you're joining and the kind of solder wire you're using.
2. Once your iron is heated to the appropriate temperature, pick up the iron by the handle in one hand and hold a piece of solder on the other hand. Hold the hot iron to the place where the two metal components will meet for about a second to heat them. You want to heat the metal parts, not the solder itself.
3. Touch the solder to the heated components. As the solder melts, it will flow into the gaps it needs to fill. Continue to feed in solder until a sufficient amount is melted. While you need enough to form a solid connection, you don't want to have too much solder either.
4. Allow the solder to cool on its own without any action.
5. Check the soldering joint for quality. A good connection will appear smooth, uniform, and shiny. Make sure that aren't any problematic gaps between the components or globs of excess solder.