top of page

HX711 Balance Module


The load cell amplifier board for the HX711 IC allows you to easily read cell load to measure weight. By connecting an amplifier to your microphone you will be able to read the resistance changes of the load cell and with some calibration, you'll be able to get very accurate weight measurements. This can be useful for creating your own industrial scale, control process, or simply the presence of an object



Low noise and programmable amplifier chip, a selectable gain of 64 and 128

On-chip voltage regulator circuit supplies power directly to the external sensor and on-chip A / D converter

On-chip oscillator clock does not require external components, if necessary, use an external crystal or clock

Automatic power in the reset circuit

Simple digital control Communication arrangements: All are controlled by input pins, the chip programmers without programming



Data output rate: 10Hz or 80Hz optional

Temporary delay of 50Hz 60Hz intervention power

Power consumption (including circuit power supply): Typical operating current: <1.7mA, switching off current: <1μA

Operating voltage range: 2.6 ~ 5.5V

Operating temperature range: -20 ~ + 85 °

Footprint Chip: SOP-16 16 pin

Size: 3x2.3cm / 1.18x0.91 "



1. Tutorial to Interface HX711 Balance Module With Load Cell

2. Weighing Machine using Arduino Load Cell & HX711 Module

3. Weighing scale using load cell and HX711 amplifier with Arduino



HX711 Weight Sensor 24 Bit / D Conversion Load Cell Adapter Amplifier Board

    bottom of page