top of page

Step angle: 1.8°

Temperature rise: below 80 ℃
Ambient temperature: -20 ℃ ~ + 50 ℃
Insulation resistance: minimum 100MΩ, 500VDC
Dielectric strength: 500VAC for 1 minute
Shaft radial clearance: 0.02 max (450 g load)
Shaft axial clearance: 0.08Max. (450 g load)
Maximum radial force: 28N (20mm from flange)
Maximum axial force: 10N
size: Approximately 42x42x40mm
Holding Torque: 4.2KG.CM;
Current / Phase: 1.7A
Step Angle(degrees): 1.8 Degree
Model Number: NEMA17
Phase:2 Type: Hybrid
Model: JK42HS40-1704-13A
Motor length: 40mm
Diameter of axle: 5mm



1. Controlling NEMA 17 Stepper Motor with Arduino and A4988 Stepper Driver Module

2. Control Stepper Motor with A4988 Driver Module and Arduino

3. A4988 Stepper Motor Driver Module



Nema 17 Stepper Motor NEMA 17 Stepping Motor with 4 wires

    bottom of page