top of page

TTGO T-SIM7000G ESP32-WROVER-B Wireless communication Development Board



The LILYGO T-SIM7000G is an ESP32 development board with a SIM7000G chip. This adds GPS, GPRS, LTE CAT-M1, and NB-IoT protocols to your board. This means that with this board you can send SMS, get location and time using GPS, and connect it to the internet using a SIM card data plan. This board doesn’t support phone calls.


Hardware Specifications
Main chip: ESP32
Module: ESP32-WROVER-B,SIM7000G
Interface:USB,SD Card,Solar Input interface
Flash Memory: 4M Flash / 8M PSRAM
Button: Reset,Power switch
USB to TTL: CP2104
Car Clock: 40MHz
SIM Card Size: Nano SIM Card
SIM Antenna
GPS Antenna
Operating Temperature Range: -40-85 degrees
Product Size: 111mm * 37mm * 20mm
Product Weight: 50g


Power Specifications
Working Voltage: 5v input
Solar input voltage range:4.4-6v
Working Curent: About 200mA
Charging Current: 780mA
Battery Model: 18650
Battery Holder Model: 18650 battery holder
JST Connector: 2pin 2mm


Protocol :802.11 b/g/n(802.11n,speed up to150Mbps)A-MPDU and A-MSDU polymerization,support 0.4μS Protection interval
Frequency :range 2.4GHz~2.5GHz(2400M~2483.5M)
Transmit Power :22dBm
Communication distance : 300m


Protocol meet Bluetooth : v4.2BR/EDR and BLE standard
Radio Frequency : with -97dBm sensitivity NZIF receiver Class-1,Class-2&Class-3 emitter AFH
Audio Frequency : CVSD&SBC audio frequency


Software Specification
Wi-Fi Mode : Station/SoftAP/SoftAP+Station/P2P
Security Mechanism : WPA/WPA2/WPA2-Enterprise/WPS
Encryption Type : AES/RSA/ECC/SHA
Firmware Upgrade :UART download/OTA(Through network/host to download and write firmware)
Software Development : Support cloud server development /SDK for user firmware development
Networking Protocol : IPv4、IPv6、SSL、TCP/UDP/HTTP/FTP/MQTT
User Configuration : AT + Instruction set, cloud server, android/iOSapp


1. Getting Started with LILYGO T-SIM7000G ESP32 (LTE, GPRS, and GPS)




TTGO T-SIM7000G ESP32-WROVER-B Wireless communication Development Board

    bottom of page